You also need to prepare your computer a bit for KMSpico. You don’t necessarily have to do this step. This step consists of precautionary measures to keep your computer safe and make sure that the activation process works successfully. First you need to disconnect your computer from the internet. This is because we don’t want there to be any chance that the activation process reaches the real activation server on the internet, because then the process will not work. If you are using Wi-Fi you can simply disconnect from the Wi-Fi. If you are using a wired connection you can either turn off your router, remove the wire from your computer, or you can just disable the internet connection from the control panel.
To disable the internet without removing the wire, look at the bottom right of your screen. Here you will see a small monitor icon, usually next to the clock at the bottom right. This is the network icon. Right click the icon and you will see the option to open the ‘Network and Sharing’ center. When you click on this the Network and Sharing center will open up. Look on the left of the window that just opened. There will be an option called ‘Change adapter settings’. Click on this option. Here you will either be shown a single connection or multiple connections. The connections are shown as two or one monitor icons.
If you have multiple connections you need to find out which one is active. This is very easy to do. All the icons which have a grey icon are disabled or disconnected already. The icon with blue monitors is the active internet connection. Right click on this and you will see the ‘Disable’ option. Click on it and the connection will be disabled. Right click again and you will see the ‘Enable’ option. Use this option to turn your internet connection back on after you are done with the activation process.